LU-YH Accessories for rubber recycling. Equipment from China

LU-YH Accessories for rubber recycling

Please, find below a list of accessories and supplementary equipment for rubber recycling lines, price of the equipment etc.

Side wall cutting machines

Tire bead seat cutting and tire cutting automatic machine .

Tire bead seat extorter

Principle of action. A pullout hook, that tears metal tire bead seat from the rubber is fixed at the lug of tire bead seat. The degree of separation of metal and rubber is 95%. The structure of the tire bead seat is of no importance. The tire bead seat is pulled out by the force received by hydraulic station .

Specifications:

Hydrosystem pressure:16Mpa(maх*20Mpa)
Main hydraulic cylinder :HSGK01-160/80H S=1200
The clamp’s hydraulic cylinder :HSGK01-100/50H S=250 :241274 N(24000 kgf)
Rated force of the pullout :301592 N(30000 kgf)
Clamping force:max*45000 N(4500 kgf)adjustable
Pullout speed :maх*3600mm/min adjustable
Pressing force:maх*2100mm/min
Engine power:5.5KW/7.5KW pc, 1 pc
Wheel size:Max dia 1200mm
Size:3800*800*1800
Weight:3000kg

Specifications:
High forces :Rated pullout force is 24000 kgf,Max pullout force is 30000 kgf
Pullout speed:Max pullout speed is 3600mm/min
Stable operation, low force.
Easy control :The machine is controlled by an only button(Preliminary pulling out, clamping, pulling out, de-clamping, return)

Staff –1 person. Functions: Feeding of the tyre, putting on the block, turning on the aggregate, removing of the pulled out rim from the working area, removing of the rimless tyre to the warehouse. Productivity –10-15 rims/hour (1tons of tyres). It can operate both with chain wheels and wheel, wheel. No foundation is required.

Blowouts: No sewage water

No volatile chemical substances

No process dust

Safety devices:

All the parts of the machine must be grounded.

It is necessary to have protective casing in the rod operation area

It is necessary to have protective casing in the extractor’s hook operation area

It is forbidden to operate with open casing.

Personnel must wear protective gauntlets

Hydralic shears for cutting large size tires into pieces

Guilottine for cutting chips from tissue cord tires

Horizontal machine for cutting tyres and extracting rims up to 24 inches (including metal cord)

The machine is used for recycling tires of 12-24 inches with metal and textile cord

It consists of

beds

Expandable mechanism for fixing the tire;

Moving beam for cutting instrument; ;

Cutting element

Electric engine;

Steering control

Stop-screw

Applications

The required size in the expandable mechanism is set using steering control (6) then the tire is put on and fixed on the machine using steering control. The beam (3) with cutting element (4) fixed on it is moved to the tire and fixed using screw (7). The electric engine switches on. (5) After 20 turns the cutting is finished and the tire bead seat is removed. Expandable mechanism is loosened using steering control. The cut tire without tire bead seat is taken away and sent to the further recycling.

Notes: In case of two shift operation the grinding of the cutting instruments is done once a two week. Once a half year the grinding instrument must be completely replaced

PRECAUTIONS MEASURES

Not to approach the machine in operation closer than 3 meters, as in case of breaking of the cutting instruments the splinters can fly asunder.

The cutting instrument may be broken due to collision with cheeks of the expandable mechanism.

It is necessary to follow the strict fixation of the beam prior to the start of operation.

It is necessary to keep general rules of electric safety .

It is necessary to wear tarpaulin gloves to avoid cutting hands.

The machine enjoys guarantee services during 3 years since crossing PR China border.

Magnetic separator on permanent magnets

Magnetic separator serves to remove metal cord particles from rubber crumb and powder

Permanent principle of operation, the magnet is set into the conveyor, operation area 650 mm*890mm. The height is adjusted from 500mm to 1500mm.
Weight 120kg. Size 100*85*150 cm.
Power15kWt .
Productivity – up to 500 kg/day.
Refinement - 99%.

Productivity – up to 500 kg/day.
Refinement - 99%.

Safety rules:

Compulsory grounding

It is necessary to use tarpaulin gauntlets.

It is recommended to use eye-protective devices.

No dust blowouts

No volatile substances

No sewage water

No permanent staff is required.

It is necessary to replace the vessels as they fill.

CS-200 cord magnetic removal conveyor

Description

The machine uses material forward movement principle. Three magnet line are used to remove the metal cord from the material

The size may vary by Customer’s order

Power	Feeding speed	Conveyor's length	The quantity of the recycled materials	Refinement ratio
0.55 kW	12-35 m/min.	2 m (by order)	300-800 kg/ hr	More than > 99%

Main abrasive unit for making 1mm zero fraction from 1mm fraction

Main abrasive unit with vibration sieve and cyclone recycles rubber without metalcord 150 kg/hour

The machine is mounted by the specialists in mounting and adjustment

After mounting it is necessary to connect the machine, turn it on, make sure that the rotation is in normal mode.

Prior to starting the production, it is necessary to load some materials to the reception hopper, otherwise abrasive heads will wear rather quickly.

After starting the machine the rubber powder is sucked by the reception tube where it is raised by air flow and enters the cyclone, where some fibrous admixtures are removed from it. The rubber powder is supplied to the reception funnel again, the operator uses handwheel to adjust the machine to the finer abrasion. The material keeps on going through the machine until reaching the fraction required.

After abrasion the rubber powder goes to vibration sieve and then goes to the packing bags via outlet. Some powder that cannot be sifted via the sieves is sucked in and fed automatically to the reception funnel, where is will be subjected to further abrasion together with rough crumb, supplied to the machine

Safety :

It is necessary to check the machine’s insulation resistance to avoid an electric shock. Do not your hands to the machine until it is necessary to avoid accidents

Main abrasive unit with vibration sieve and cyclone. cord

it recycles rubber without metal - 300 kg/hr.

Main abrasive complex with vibration sieve, conveyor, 2 magnetic separators and cyclon

The machine is to be mounted by specialists.

After mounting it is necessary to connect the machine, turn it on, make sure that the rotation is in normal mode.

Prior to starting the production, it is necessary to load some materials to the reception hopper, otherwise abrasive heads will wear rather quickly.

Safety:It is necessary to check the machine’s insulation resistance to avoid an electric shock. Do not your hands to the machine until it is necessary to avoid accidents.

Hydraulic four-gutter press for making floor covers

Rubber track production line is used for treatment of various materials that require hot molding under pressure. For instance, this machine can be used for making rubber products, various hot mold plastics and shapeless products from the above materials. It can also be applied for cold molding, PVC foam, footwear, tires etc. The field of using of rubber track production machines expands more and more.

This production line consists of press, hydraulic device, heating device and other parts. The column type press is reliable and durable. Hydraulic cylinder is installed in the lower part of the production line. The cylinder’s piston moves up and down. The cylinder is made of high quality spheroidal pig iron. It affords accuracy in treatment is safe in operation and very reliable.

There are either 2 or 4 operation levels. Max clearance between levels is 125 mm. There are heating tubular elements inside each heating plate. Heating power of each heating plate is 6,3 kW. Heating temperature of the heating plate is shown by the indicator on the control panel. To adjust temperature modern indicators and controls are used. Heating indicator is installed on the control panel. Accurate and handy temperature control. The machine is supplied with microprocessor based adjustment system. Plates’ temperature is stable the fluctuations are negligible. There’s high accuracy of the heating control.

Hydraulic device of the mechanical part of the machine has one gear type oil pump and one axial plunger pump. The pumps mounted on the oil tank have simple and reliable design. Hudraulic device operates by itself, its control valve is installed on the main part of the machine. The device and simple and easy to operate. If the customer wants one pump to serve two or three machines, it requires just a little modification. Besides, the production line can be operated without any modifications

2. Specifications

Mold closure force: 0,63 mn. (63 tons.)
Operation pressure: 16,5 mPa (165 kgs/cm²)
Size of heating plate: 500х500х2 or 400х400х2
Number of operation levels: 2 floors
Clearance between floors : 125 mm
Cylinder’s piston stroke: 250 mm
Cylinder’s piston diameter: 220 mm
Operation temperature : 128-200^oС
Total heating power:

Plate 500: 10,8 kW

Plate 400: 9 kW
Electric engine power

Low pressure pump : 1,1 kW

High pressure pump 1,5 kW
Total weight:

of plate 500: is about 2200 kg

PLate 400 –about 2000 kg

Tire separator
The machine serves for mechanical separation of tires. ( mainly with textile cord) the tire is cut into three bands (protector and two side frames) This machine separates the bands into cord and rubber ones. Henceforward these bands are recycled separately, thus allowing; To reduce energy consumption during recycling on the main abrasive machine. The smaller raw materials are better for recycling.

To improve the quality of the final product. If the purest product is required, it is possible not to use the bands with large textile cord contents.

The machine doesn’t require any fundament. The time of recycling of one tyre (three bands) is up to 10 minutes

Applications

A cut of a depth of 4-5 cm is made lengthwise at the band’s end face. The edge of the cut (corded layer is recommended) is fixed by the lock on the chain mechanism. The band is reeled on the fixing drum, then the machine turns on. As the drum rotates in opposite directions, the mechanical tearing into two different layers occurs. As a result, cordless layer reels on the fixing drum, where corded rubber is reeled on the driven drum.

Safety

1 To keep common rules of electric safety .

2. Grounding is compulsory .
3. Distance between the operator and the machine in operation should be no less than 3 meters .

No permanent contact of the personnel with the machine is not required

The machine has guarantee during three years since leaving the PRC China .

Layerer for thich rubber pieces without metal cord
The machine is used for separation of treads of textile cord tires to make them thinner. For instance- BELAZ tires and aviation tires, where the rubber thickness is 15 -17 cm.
This machine relates to supplementary equipment, thus it is not included in the basic set. Its size is 2.8X1.6X0.7 m.
Weight – 180 kg.
Power – 2.3kW.
Productivity – up to 1 ton/shift.
Cutting instruments are ground once a month, the machine doesn’t require any fundament. It cannot be used for metal cord containing rubber. A cut of a depth of 1-1.5 cm is made on rubber band. The lower part is put into the machine and pressed by clutching frame. The machine turns on. Lower layer is drawn in under the shaft along the blade. Upper layer goes into the opening over the shaft and blade. Standard thickness of the layer fit for the further recycling is 1.5-2cm. If necessary, the cutting may be repeated several times.

Emittance:no waste water

No technological dust

No chemical waste

NO vibrations

Safety measures:

- It is necessary to work using chain-armored gloves (gauntlets)

- The machine must be grounded

Machine for getting metal out of tire bead seat

Machine for making 3x3 billets with metal cord

The machine serves for recycling “endless” bands into billets of 3x3 cm, thickness up to 15 cm (recommended thickness is 3-4 cm) .

It consists of reception mechanism;

cutting element-octagonal star

bed with electric engine;

Tray for finished products .

Application

" Endless” band is put into the machine’s reception part, the machine turns on. Band cutting and billet throwing occur automatically, that’s why permanent presence of the personnel is not required. All the stuff must do is feed now band by hand and collect billets. After putting the band the machine draws it inside itself. Time of cutting of one wheel’s band is 4-5 minutes

In case clogging or overload the machine restore operation mode by reverse running.

Note 1, No fundament is required .

Note 2. Grinding of the cutting instrument, i.e. hexahedral star is to be performed twice a month, its service time is 6 months .

SAFETY PRECAUTIONS

It is necessary to observe common rules of electric safety .

1) It is necessary to prevent hitting upper parts and fingers into the reception mechanism
2)It is recommended to work in chain-armored gauntlets (gloves)
3) Unauthorized regulation of the operation speed of cutting elements is forbidden
4) Unauthorized replacement of hexahedral elements by octahedral and nonahedral is forbidden .

The replacement of hexahedral elements by tetrahedral and pentahedral is permissible.

The machine receives warranty service during 3 years after crossing the border of PR China.

Machine for cutting halves and quarters of large size tyres into billets of 10x10.

The machine has 6 floating blades and 4 fixed blades. Inlet chamber 1500*500mm, depth up to 1000mm.
Size 2500*3500*2200mm.
Weight 2200kg.
Productivity 3500kg/shift.
Power 20 kwt /hr.
Maintenance of cutting elements after 200-220 hours of operation. .

Staff –1 person.
Function: Following the removal of the tire bead seat the tyres and their parts are fed into inlet chamber, and re-loading of 10*10 billets from finished product tray to the storage area. Control of the aggregate operation .

Discharges : No waste waters

No chemical volatile elements

Process dust - 0,001%

Noise- within 45 db

No vibrations

Safety

The aggregates’ grounding is compulsory

Protective gauntlets are compulsory

Chain armor gauntlets are recommended

Operation and service of cutting elements with the engine turn on is forbidden

Operations with no protective casings of drives and inlet chamber are forbidden.

Machine for cutting tyres into bands of length up to 10 m and width of 5 cm .

The machine recycles tires and conveyor belts with textile and metal cord by their cutting between two fixed disc blades Diameters of the recycled tires – 12 and 24 inches.

It consists of: upper disc blade;

Body with electric engine inside

Application method

The tire without removed tire bead seat is inserted between disk blades by the ringless side. The machine switches on. During the operation the tire should be suspended or there should be a pedestal. Machine can rubber with the thickness up to 15 cm. (the rubber taken from submarines’ isolation and air-planes tires). The width of the band can vary from 2.5 to 7 cm. It is adjusted by simultaneous shift of both disk blades for the distance required. The required clearance is 3 - 3,5 cm, the machine is primarily adjusted for this level.The time of recycling of one 24-inch tire is 4-5 minutes. .

Note 1: No foundation is required .

Note 2:Blades can serve for 1 year. Complete grinding of blades should be made every month

Annual replacement

SAFETY MEASURES

It is necessary to keep the common electric safety rules. The machine must be grounded. As the personnel will always be in contact with the mechanism, it is necessary to avoid the possibility of falling the personnel’s upper parts and fingers between the disk blades.

It is recommended to operate in metal chain armor gloves
In the case of the machine seizure during the cutting it can be released by reverse motion.

During the operation the machine should not be readjusted, the rotation speed limiters should not be removed.

The tire is cut into “endless” band until there are 4-5 cm to the second tire bead seat 4-5 cm

The machine enjoys guarantee services during 3 years since crossing PR China border.

Machine for vertical grinding of crumbs into powder .

Cyclone for elimination of the textile cord and dust

It is destined for collection and removal textile cord during the operation of main abrasive aggregate.

Size 2200*600*600. Weight 250kg Cyclone principle is used. Power –2kwt/hour. Productivity – up to 3000 kg/hour. No permanent staff is used. The vessel full of textile cord is to be replaced 4-5 times/shift.

Safety :

1. grounding of all machines

2. It is necessary use eye and breath tract protective devices

3. It is recommended to use forced ventilation system

Blowouts:

1. No waste waters

2. No volatile chemical elements

Process dust from textile cord – 0.1% of the materials recycled .

Vertical four fraction vibration sieve

Shredder for total destruction of

The machine serves to cut ordinary tires and radial corded tires into pieces. The equipment is of small size, low noise, high productivity, it is easy to operate. This high efficient equipment has a service time of 5 years.

Model

LPF 530*50-1200

LPF 420*50-800

Number of blades

22 pcs

14

Blade size , mm

530*50

420*50

Rotation, rpm

30.68

18.9

Working chamber diameter, mm

1200

800

Productivity

300 tires/hr

0.8-1.3 tons/hr

Main machine model

JR126-6

Y280M-8

Main engine power, kW/hr

155

45

Reducer

NGW planetary reducer

NGW planetary reducer

Reducer’s rotation speed

31.8

39

Separate cylinder rotation, rpm

8.5 ~ 42.5

5.7

General size, mm (length*width*height)

5890*2620*2800

4405*2000*2510

Weight, kg

14500

6600

Model	LP 1200
Number of blades	22
Blade size	530х50
Speed of rotation of blades (rpm)	30,68
Operation length of chamber (mm)	1200
Productivity (kg/hr)	2000
Main engine brand	jr125-6
Power(kW)	155
Size (mm)	5500х1800х3500
Weight (kg)	15000
Raw outlet hole	50*50mm
Delivery	during two months

Model	PX-370
Engine power	37-45KW(6)(by customer requirements)
Shaft rotation speed	15-25 rpm(by customer’s requirements)
Sieving drum rotation speed	5.3 .-9 rpm (by customer’s requirements )
Raw materials receptor’s standards	1. less than 750 140 (the whole tire can pushed into) 2. more than 750*140(the tire is put into after cutting) 3.It is necessary to remove metal cord from the tire 4. It is necessary to remove thick wire
Standard of the raw materials relieving hole	25-50mm*25-50mm(by customer’s requirement)
Productivity	500kg-2000kg/hr(depending on the final product)
Size LXWXH	262023102290

Non-metal cord chips cutting machine

Tire bead seat vertical cutting machine

Coarse cleaning single layer vibro-sieve

Fine cleaning single layer vibro-sieve

It has three separation levels :

First level - 0,5-0,0mm (powder)

Second level 1,-0,5mm (crumb)

1) Third level - Larger fractions for secondary recycling .

Automatically supplied to magnetic separators from level 1 and level 2. Supply of raw materials on conveyor from level 3

Replaceable bolting cloth . Weight -500 kg.
Power -3 kW.
Productivity – 3000 kg/shift.
Separation by fractions – 99% %

Size 1200*500*5000mm

3 adjusted outlets of products .

Vibration sieves – no waste waters

No volatile chemical elements

Processed dust – 0.01% of the recycled volume

Safety :

1) eye and respiratory protective devices are compulsory

2) Forced ventilation system is recommended

3) Grounding of the structure’s elements is compulsory

Personnel -1 person.

Relaceable sieves for vibro-sieves

Fine fraction abrasive machine

It serves for reduction of rubber .

Rotated corrugated holed drums are made of chill cast iron with wear resistant coating

Protective devices secure the protection of main parts from damage in case of great overloading There’s a reverse brake system over the drums. In case of emergency safety lever goes down and the drums stop rotation immediately. The distance between rotating drums can be adjusted by hand using wheel.. It is easy mountable machine. The drums rotate freely both left and right The rotation direction should be set beforehand.

Model	ZKF—480A	ZKF—480B	ZKF—480C
Front drum’s diameter, mm	480	480	480
Rear drum’s diameter, mm	610	610	610
Length of drums mm	800	800	800
Linear speed of the frontal drum m/min	22	22.13	22.13
Wear	1:2.1	1:2.1	1:2.1
Max clearance between drums mm	15	15	15
Productivity, kg/hr	150	150	150
Main engine model	Y315S-6	Y315S-6	Y315S-6
Main engine power kW/hour	75	75	75
Main engine rotation speed, rpm.	980	980	980
Reducer	Herring-bone gear reducer	NGW planetary reducer	NGW planetary reducer
Reducer’s rotation speed	11.6	40	40
General size, mm LengthwidthHeight)	54502450780	550023301780	550023301780
Weight, kg	17000	19500	16000

LU-YH-7 textile cord rubber complex recycling line

LU-YH-5 textile cord rubber complex recycling line
Productivity – 1ton/shift

Crusher (for cutting non-metal cord chips into crumb 15x15 mm)

Soft rubber washing machine

Electric board (See operation instructions)