LU-RPX-420-D Waste rubber three-axis single pass attritor

Name Specifications
1 Brand LU-RPX-420-D
2 Trademark MEGA POWER
3 Type Single pass
4 Series JP
5 Designer USA and Israel
6 Year 2007
7 Made in Chine Jointdesign
8 Productivity of 1 plant Work-pieces, 1300 kg/hr
9 Itextracts as follows  
10 Metal cord 240 kg/hour
11 Textile cord 60 kg/hour
12 Powder (less than 0.5 mm) 500 kg/hour
13 Large fraction (more than 0.5 mm) 500 kg/hour
14 Productivity (rubber crumb for 22 hrs). 22000 kg. (22 tons)
15 Productivity (rubber crumb for 300 days) 6600 tons
16 Gross power 115 kW
17 Average energy consumption 85 kW
18 Main engine 46 kW
19 Auxiliary engine of the second axis 25 kW
20 Auxiliary engine of the third axis 25 kW
21 Water circulating pump 1 kW
22 Dust-extractor pump 3 units. 3 х 2 kW = 6 kW
23 Engine of the separation mechanism 4 kW
24 Engine of the magnetic separator 2 kW
25 Internal feed system 2 х 3 kW =:6kW
26 Magnetic separator Permanent magnets
27 Cooling Forced water cooling
28 Water consumption/hr for evaporation 12-14 L \hr
29 Water consumption cycle Closed
30 Operation temperature 90-95oC
31 Emergency stop temperature 175-180 oC
32 recycles work-pieces 1000 х1000 х750 mm
33 Engine life 5 years
34 Warranty 1 year
35 Weight of the whole unit 12 800 kg
36 Weightof the Вес assembly unit 15200 кг
37 Weight of the drumА420 х 850 mmsteel, first axis 1600 kg. (Made in Japan)
38 Weight of the drum В420 х 850 mmsteel, the second axis 1600 kg (Made in Japan)
39 Weight of the drum С273 х 850 mmsilicon-polymer, the first axis 820 kg (Made in Japan)
40 Weight of the drum D 563 х 850 mmsilicon-polymer , the second axis 2130 kg (Made in Japan)
41 Weight of the drumЕ420 х 850 mmsteel, the third axis 1600 kg (Made in Japan)
42 Weight of the drum F 237 х 850 mm silicon-polymer, the third axis 820 kg (Made in Japan)
43 Warranted engine life of the drums (by raw materials) 25000 tons of raw materials
44 Specification offirst drums of the axis Smooth
45 Specification of the second drums of the axis With drawings
46 Rotation Asynchronous
47 Removal of textile cord During milling, from 6 points, 3 cyclones
48 Purity by textile 99,5%
49 Removal of metal cord With supplementary units, outside the plant
50 Purity by metal 99,9%
51 Length of transportation 3450 mm
52 Working length 4200 mm
53 Width of transportation 2780 mm
54 Working width 3820 mm
55 Height of transportation 2560 mm
56 Working height 4300 mm
57 Main engine drive Gear
58 Reducer 3 units
59 Auxiliary machines drive Belt, v-shaped
60 Drive in the propellers of the second and third axis Gear
61 Drive in separator Worm
62 Continuous cycled feeding of raw materials Is chosen by an operator depending on raw materials
63 Velocity factor, rpm. 1:1.237
64 Velocity offront line of rollers, rpm 124.
65 Velocity of medium line of roller, rpm 237
66 Velocity ofrear line of rollers, rpm 186
67 Amount of fed raw materials,kg/cycle 110 kg
68 Max distance between rollers, one couple 11 mm
69 Min distance between rollers, two couples. 0,3 mm
70 Time of one cycle 5 minutes
71 Personnel 1 person for 5 plants
72 Maintenance 1 Once/two weeks
73 Disassembly of hermetic case during maintenance. 5-6 hrs
74 Production area 25 m2
75 Noise 83 dB
76 Vibration No
77 Reverse There is
78 Emergency thermal stop detector There is
79 Foundation Is requires
80 Fine dust emissions Less than 0,0001%/hr
81 Work-process related parameters, climate In room
82 How many containers are required for transportation. One 20 ft. container,
83 Certificates USA, Israel, Pr. China, Russia
84 Raw materials Any type of rubber
85 Starting-up and adjusting 2 persons from the manufacturing plant, 14 days.
86 Name of the manufacturer Aspen factory
87 Manufacturing time after payment 90 Days